- 7 -
ENGLISH
CUTTING DEPTH
1. The recommended cutting depth for all materials is
1
⁄4” below the top sur-
face of the cutting table. (See Diagram)
2. To adjust cutting depth, loosen mounting plate adjustment knob.
BELT REPLACEMENT
CAUTION: ALWAYS TURN OFF SAW AND UNPLUG FROM POWER SOURCE BEFORE
REMOVING BELT GUARD OR ADJUSTING/CHANGING BELT.
1. Loosen and remove the belt guard screws and take off the belt guard.
2. Loosen the 4 nuts (front & back) on the mounting plate.
3. Gently loosen the motor adjustment clip on the very rear of the motor
mounting plate.
4. Carefully nudge the motor slightly forward so there is a little slack in the belt.
5. Remove the old belt and replace with the new belt.
6. To reassemble, reverse Steps 1-5.
BELT REPLACEMENT DIAGRAM
BEARING HOUSING REPLACEMENT
1. Follow BLADE INSTALLATION instructions on page 5.
2. Hold down the blade shaft lock until it locks in place. Turn the inner flange off
(counter-clockwise).
3. Follow BELT REPLACEMENT instructions on above. Then, unscrew the hex screw
and take out the pulley.
4. Hold the bearing housing and unscrew the 3 hex screws on the mounting plate.
5. Now the bearing housing is ready to be removed.
6. To replace all parts, reverse steps in instructions.
BEARING HOUSING REPLACEMENT
DIAGRAM
SAW MAINTENANCE
WARNING: DO NOT SERVICE, CLEAN OR MAINTAIN THE SAW WITHOUT FIRST TURNING OFF THE MOTOR AND UNPLUG-
GING THE SAW FROM ITS POWER SOURCE. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY TO THE OPERATOR.
1. For longest life and best performance, clean the saw after every use.
2. Wipe off all exterior surfaces and keep the cutting table clean and free to tile chips and debris.
3. Wipe off both the guide bars and the rollers on the cutting table.
4. Place light machine oil on the guide bar to facilitate smooth travel of the linear guide assembly.
5. The guide bars are specially treated to give you years of operation.
6. Always check the blade for cracks or signs of fatigue.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels